Lift Maintenance Safety Training

Welcome to the official fall protection training for Mount Kato's Operations Department. This module covers essential safety principles based on MNOSHA, ANSI B77, and NSAA guidelines to ensure your safety while working at height.

Why This Matters

In our industry, falls are a leading cause of serious injury. Proper training and equipment are not just about compliance; they are critical for preventing accidents. This chart highlights common factors in workplace falls.

Core Fundamentals

When is Fall Protection Required?

According to MNOSHA, fall protection is required for any work performed at a height of 4 feet or more on a walking/working surface with an unprotected side or edge. For ski lift maintenance, this applies to nearly all work outside of the ground floor of buildings.

The ABCs of Fall Protection

A personal fall arrest system (PFAS) is comprised of three essential components. Click on each letter below to learn more.

A

Anchorage

B

Body Support

C

Connectors

Select a letter to see details.

Equipment Inspection

Your life depends on your gear. A thorough inspection must be performed before each use. Click on each component to see its inspection checklist.

Common Work Scenarios

Let's apply these principles to tasks you perform every day. Select a scenario to review the correct procedures and identify key hazards.

Fall Rescue Plan

Urgency: Suspension Trauma

If a fall occurs, the suspended worker is in immediate danger. Suspension trauma (orthostatic intolerance) can cause serious injury or death in a short amount of time as blood pools in the legs. A rescue plan must be in place, and rescue must be initiated immediately.

Mount Kato Rescue Protocol

1. Notify Supervisor & Call for Help: Immediately use radio or phone to declare an emergency. Provide the exact location (e.g., "Tower 5 on Lift 2").
2. Assess the Scene: Ensure it's safe for rescuers to approach. Do not put more people at risk.
3. Initiate On-Site Rescue (If Trained & Equipped): If a self-rescue is not possible, use the designated rescue kit. The primary method is to lower the worker to the ground or to a stable platform.
4. Encourage the Suspended Worker: Advise them to push against any available surface with their legs and to use their trauma straps if available. This helps circulation.
5. Post-Rescue Care: Once rescued, do not have the person stand up immediately. They should be seated or lying down to allow blood flow to normalize. Seek immediate professional medical evaluation, even if they feel fine.

Knowledge Check

Test your understanding of the material. Good luck!